My Cart  

Ziehl Abegg 4CS Drive

The new contactorless ZA 4CS drive is used on all types of installations whether it be for synchronous or asynchronous motors.

The easy-to-use keypad and compatibility with all ZA motors make for an easy solution on many installations. The recently introduced ZA REC unit makes the combination a perfect match for any regenerative installations. Like the HPV900 S2, direct-to-floor approach using serial communications is standard when used in conjuction with a CEDES or USP Shaft Positioning System.

  • Wall mounting in the machine room or elevator shaft
  • Mounting in the switch cabinet
  • Line choke, radio interference filter integrated
  • Space-saving installation due to compact design
  • Operation of synchronous motors (ZETADYN 4CS) and asynchronous motors (ZETADYN 4CA)
  • Open-loop operation of asynchronous motors
  • Standby function
  • 4-line display with clear text display
  • Minimal noise generation and low energy
    consumption through controlled ventilation
  • Automatic travel curve pre-assignment
  • Switching frequency: 4 to16 kHz (automatic adaptation)
  • EN 12015 and EN 12016
  • Protection class: IP20


  • Programmable inputs and outputs
  • 5 x relay outputs (potential-free)
  • 12 x digital inputs (24 VDC)
  • DCP
  • CANopen-Lift
  • All interfaces galvanic isolated


  • Incremental encoder
  • HTL / TTL / Sinus
  • Absolute encoder
  • EnDat / SSI / ERN 1387 / Codeface /Hyperface
  • Encoder simulation for controller


  • Temperature monitoring brake resistor
  • Temperature monitoring motor (in accordance with EN 61800-5-1:2008-04)
  • Motor contactor monitoring (with optional use of motor contactors)
  • Brake release monitoring in accordance with EN 81-43
  • The ZAdyn4C comes factory equipped with all interfaces