The UK's largest independent lift control panel manufacturer.

Traction VVVF Ziehl Abegg 4CS

The new contactorless ZA 4CS drive is used on all types of installations whether it be for synchronous or asynchronous motors.

The easy-to-use keypad and compatibility with all ZA motors make for an easy solution on many installations. The recently introduced ZA REC unit makes the combination a perfect match for any regenerative installations. Like the HPV900 S2, direct-to-floor approach using serial communications is standard when used in conjuction with a CEDES or USP Shaft Positioning System.

Features

  • Wall mounting in the machine room or elevator shaft
  • Mounting in the switch cabinet
  • Line choke, radio interference filter integrated
  • Space-saving installation due to compact design
  • Operation of synchronous motors (ZETADYN 4CS) and asynchronous motors (ZETADYN 4CA)
  • Open-loop operation of asynchronous motors
  • Standby function
  • 4-line display with clear text display
  • Minimal noise generation and low energy
    consumption through controlled ventilation
  • Automatic travel curve pre-assignment
  • Switching frequency: 4 to16 kHz (automatic adaptation)
  • EN 12015 and EN 12016
  • Protection class: IP20

Interfaces

Controller

  • Programmable inputs and outputs
  • 5 x relay outputs (potential-free)
  • 12 x digital inputs (24 VDC)
  • DCP
  • CANopen-Lift
  • All interfaces galvanic isolated

 

Encoder

  • Incremental encoder
  • HTL / TTL / Sinus
  • Absolute encoder
  • EnDat / SSI / ERN 1387 / Codeface /Hyperface
  • Encoder simulation for controller

 

Monitoring

  • Temperature monitoring brake resistor
  • Temperature monitoring motor (in accordance with EN 61800-5-1:2008-04)
  • Motor contactor monitoring (with optional use of motor contactors)
  • Brake release monitoring in accordance with EN 81-43
  • The ZAdyn4C comes factory equipped with all interfaces