The UK's largest independent lift control panel manufacturer.

DU2-Position-Indicator
DSC_9349-[DU2]-Mod
DU2H - Cut Out : 54mm (w) x 40mm (h) Studs : 2 x M4 x 10mm studs @ 85mm hole centres
DSC_9349-[DU2]-Vertical-Mod
DU2V - Cut Out : 40mm (w) x 54mm (h) Studs : 2 x M4 x 10mm studs @ 85mm hole centres

DU2 Position Indicator

The indicator comes in vertical and horizontal formats. The 54mm x 40mm window can be used in the horizontal or vertical mode. Although the single character height is increased in the vertical mode, the permanent direction arrow is now not displayed. To compensate this we “flash” the direction indication every 2 seconds.

In horizontal mode, up to 2 digits are displayed but at the expense of the direction arrow. The indicator is not switchable so stud setup is important. The indicator can run either in discrete or binary mode.

 

 

DU2 Position Indicator PDF Download DU2 Manual DU2 Manual Wiring Diagram

Features

  • Single or Double Digit

Advantages

  • Competitive
  • 12 – 24v AC or DC Supply
  • No Driver Card Required

Product Codes

DU2 Indicator – Horizontal DU2H
DU2 Indicator – Vertical -DU2V
DU2 Lens – DU2LENS
Binary Encoder (1-8 Floors) BIN8
Binary Encoder (1-16 Floors) BIN16
Binary Encoder (1-8 Floors) BIN8
Binary Encoder (1-16 Floors) BIN16