Type VSSA
This is a stand alone unit designed to give voice announcements concerning lift position, direction, door operation and lift status.
Inputs are opto isolated for 24v DC operation.
Six inputs are available for floor announcements on a discrete input basis. For more floors the they are binary encoded.
The audio output is via a 8 Ohm speaker at 1 watt.
Type VS1
This unit is an interface module that rests in the COP and is to be used when TC3 indicators are purchased. The board uses the same 4 wire CAN communication line wire for the indicators to reduce site wiring and ease of installation.
The PCB uses surface mount technology and can be housed neatly away in any COP. A volume control is still present giving the Customer full flexibility with its installation.
Type VU2
A more robust model / type and used on non standard voice applications, with a 240v/ 110v AC mains supply the VU2 will respond to inputs 12 to 24v DC fed directly from existing position indicators
