The highly successful TC3 (Tri colour 3 digit) range of indicators comprises of a Controller Interface Module (fitted in the lift controller) and a digital indicator fitted in the lift car and/ or on the landings. With the advent of our new processor (Almega) the interface module is not required and hence make the indicator more versatile and cheaper to use.
The indicator comes in three distinct sizes.
The only shortfall with the 2 digit display (TC3 50 2D) is that it can only at any one time display a maximum of 2 digits. Whether it be the floor display and direction arrows or just the floor display (if it is more than 1 digit) then the direction arrows have to be dropped. To compensate this the display can scroll upwards in green and downwards in red showing direction of travel without actually showing an arrow. The Hall Lantern facility is not compromised however.
All message displays are shown in red and alternate between the message and the lift position during operation. A binary encoder can be supplied should the lift exceed the 6 standard discrete inputs available.
The interface is fully user programmable and can display all floor denominations. The voice unit (VS1) will follow the display as long as the floor being displayed is in the Voice Library. Check with Lester Controls first if you have any queries.
