Since their introduction in 2001 Lesters have sold far in excess of 25,000 push buttons. Their robust design ease of wiring and general reliability have helped prove their suitability for the harsh lift environment.

The PB3 range is designed to DDA standards and has the added advantage of being Braille tactile.

All pushes have a red halo and operate at 24v DC.

Other colour and voltage options are available and can be supplied to order.

Features

Our push buttons are supplied with the following features:

• Two isolated normally open contacts (250vAC, 2A resistive load rating)
• LED type indicator with control for partial and full illumination
• Units available for 12 & 24vAC or DC operation (specify voltage with order)
• LED current per push unit is 20mA
• LED’s are RED as standard (yellow,green, and blue available)
• Screw Terminal Fixings

Product Codes

Brass Pushes (PB2) NON DDA

Brass-Yellow-Alarm	PB2YA	£19.50
Brass–Red–'1'	PB2R1	£18.50
Brass–Red–'2'	PB2R2
Brass–Red–Door Open	PB2RDO	£18.50

Braille Pushes (PB3) DDA Compatible

Braille–Yellow–Alar	PB3YA	£19.50
Braille–Green–'0' Exit Floor	PB3RG0	£20.00
Braille–Red '1'	PB3R1
Braille–Red '2'	PB3R2
Braille–Red–Door Open	PB3RDO	£17.50

Braille Pushes (PB3) DDA Compatible

2 Way Buzzer	2BUZZ	£15.00
4 Way Buzzer	4BUZZ	£25.00
8 Way Buzzer	8BUZZ	£30.00