Our new monochrome indicator has been designed to compliment the LCD90 at a reduced cost. It is as powerful as the LCD90 without the thrills of being Full Colour.
Again the display is controlled by three keys on the rear of the indicator and an interactive display is produced on the front.
The MONO100 has really been designed for use on the landings and can be used in a horizontal or vertical mode.
The settings are made by a menu system of up to three levels. SW3 is used as an enter/accept key, SW1 and SW2 are used to scroll through the menu options. The menu options let you do the following:
- Turn the scrolling arrows On or OFF
- Display the direction arrows into 3D
- Adjust the time and date
- Change the Floor display setup
- Change the Fault display messages
The indicator is supplied with a DC voltage either smoothed or full wave rectified via CN8. 0V is connected to B- and +V to B+. The supply should be between 12vrms and 24vdc, the current drawn will be dependant on voltage but will drop as voltage rises so as to supply an almost constant 6Watt maximum; that is 500mA @12V and 250mA @24V.
All input levels are between +7 and +24V dc positive logic.
