Our new full colour LCD indicator has been designed using up to date technology coupled with an easy to change on site menu structure.
The entire system is controlled by three keys on the rear of the indicator and an interactive display is produced on the front. The settings are made by a menu system of up to three levels. SW3 is used as an enter/accept key, SW1 and SW2 are used to scroll through the menu options.
The menu options let you do the following:
- Turn the scrolling arrows On or OFF
- Display the direction arrows into 3D
- Adjust the time and date
- Change the Colour display
- Change the Floor display setup
- Change the Fault display messages
- Change the background Logo (Where applicable)
The indicator is supplied with a DC voltage either smoothed or full wave rectified via CN8.0V is connected to B- and +V to B+. The supply should be between 12vrms and 24vdc, the current drawn will be dependant on voltage but will drop as voltage rises so as to supply an almost constant 6Watt maximum; that is 500mA @12V and 250mA @24V.
All input levels are between +7 and +24V dc positive logic.
